Build 2015.05

pblasi
Posts: 29
Joined: Wed Mar 04, 2015 8:04 am
My ELO: 0-1000

Re: Build 2015.05

Post by pblasi » Fri May 15, 2015 8:42 am

sergeyvl wrote:Upload here your launcher.sh
I cannot attach launcher.sh here, I get a file extension error. Here is a link to file:

https://drive.google.com/file/d/0B-VBjf ... sp=sharing

This is the modified one which causes the problem. I needed to restore last line and mark launcher picture "as unread" to start coolreader again.

embryo
Posts: 3
Joined: Tue May 19, 2015 1:06 pm
My ELO: I don't know

Re: Build 2015.05

Post by embryo » Tue May 19, 2015 1:51 pm

I did create a new topic, but after submitting it, it disappeared...
Anyway, I can post the (potential) bug here.

I'm using KSM in a Kobo Glo (non HD)
I re-downloaded the last 'pbchess-2015.05_kobo.zip'.
I erased the 2015.3 version (that was working fine) from my /.adds folder.
Copied the vlasovsoft folder (from 2015.5) to the /.adds folder on my reader.
Open up a book.
The page is refreshing at every page turn.
I change the number at the page setting to anything between 2 - 10.
The page is refreshing at every page turn.
Do I miss something?
Is there an other setting somewhere?
Is it normal?

Edit: After some time the post I created appeared.
Is there a checking procedure or something?

AlterusPrime
Posts: 29
Joined: Fri May 15, 2015 5:33 am
My ELO: I don't know

Re: Build 2015.05

Post by AlterusPrime » Thu May 21, 2015 5:26 am

2015-05-20
1. OPDS_alpha added. It's a very basic version, has some issues.
2. Kobo Aura H2O. Fixed "out of border" issue. To apply the fix you should put margin_top=N (N measured in pixels) parameter into cr3/cr3.ini (NOT cr3/data/cr3.ini!). With that full refresh parameter is respected by CR.
3. Qutting to nickel just became even easier. To do so you gotta make an empty file named "nickel" (no quotes) in the vlasovsoft directory.
4. New PocketBook firmware is supported now, you should use another build though - pbchess_2015.05_obreey.zip.
Last edited by AlterusPrime on Thu May 21, 2015 12:16 pm, edited 1 time in total.
Kobo Glo 3.19.5761 (Kobo Start Menu 8 + CoolReader 2016.03 (March, 21))

sergeyvl
Posts: 1564
Joined: Sun Nov 13, 2011 5:43 pm
My ELO: 1700-1800
Location: Харьков
Contact:

Re: Build 2015.05

Post by sergeyvl » Thu May 21, 2015 6:12 am

AlterusPrime wrote:2015-05-20
1. OPDS_alpha added. It's a very basic version, has some issues.
2. Kobo Aura H2O. Fixed "out of border" issue. To apply the fix you should put marging_top=N (N measured in pixels) parameter into cr3/cr3.ini (NOT cr3/data/cr3.ini!). With that full refresh parameter is respected by CR.
3. Qutting to nickel just became even easier. To do so you gotta make an empty file named "nickel" (no quotes) in the vlasovsoft directory.
4. New PocketBook firmware is supported now, you should use another build though - pbchess_2015.05_obreey.zip.
Thanks, AlterusPrime
BEWARE. Qutting to nickel can hang your reader and reset all the CR settings in this build. Don't use it for a while.

LittleBiG
Posts: 56
Joined: Tue Feb 10, 2015 11:56 am
My ELO: I don't know

Re: 2015.05

Post by LittleBiG » Fri May 22, 2015 5:52 pm

sergeyvl wrote:
LittleBiG wrote:Two bugs:
1. Opening Coolreader, the font type falls back to a default one. I have to do a refresh (change the font size or open the book again for example) to get the font type defined in the settings.
2. Page interval update setting is not honored any more. Every page turn causes a full refresh.
Thanks. I'll test #1.

#2 works well. How do you change page update interval? And please provide debug log.
By settings.

Code: Select all

[2015-05-22 19:46:52]	I	Executing: /mnt/onboard/.kobo/vlasovsoft/cr3.sh
[2015-05-22 19:46:52]	I	process >> ScreenPlugin::ScreenPlugin() 
[2015-05-22 19:46:52]	I	process >> ScreenPlugin::create() 
[2015-05-22 19:46:52]	I	process >> KoboFb - Screen size: 800 x 600 (102mm x 76mm) 
[2015-05-22 19:46:53]	I	process >> [2015-05-22 19:46:53]	I	Program started, version: 2015.05.d902d65d07cd 
[2015-05-22 19:46:53]	I	process >> 46 fonts loaded. [2015-05-22 19:46:53]	I	Pipe thread started:  
[2015-05-22 19:46:53]	I	process >> QFSFileEngine::open: No file name specified 
[2015-05-22 19:46:53]	I	process >> [2015-05-22 19:46:53]	I	Pipe thread finished 
[2015-05-22 19:46:53]	I	process >> QFSFileEngine::open: No file name specified 
[2015-05-22 19:46:55]	I	process >> QFSFileEngine::open: No file name specified 
[2015-05-22 19:46:55]	I	process >> PAGE++(4) ; battery: 62
[2015-05-22 19:46:56]	I	process >> QFSFileEngine::open: No file name specified 
[2015-05-22 19:46:56]	I	process >> PAGE++(3) ; battery: 62
[2015-05-22 19:46:58]	I	process >> QFSFileEngine::open: No file name specified 
[2015-05-22 19:46:58]	I	process >> PAGE++(2) ; battery: 62
[2015-05-22 19:47:01]	I	process >> [2015-05-22 19:47:01]	I	Program finished 
Kobo Mini v3.4.1 and Pocketbook Touch Lux 2 v5.8

sergeyvl
Posts: 1564
Joined: Sun Nov 13, 2011 5:43 pm
My ELO: 1700-1800
Location: Харьков
Contact:

Re: Build 2015.05

Post by sergeyvl » Fri May 22, 2015 6:12 pm

Do you use Kobo Start Menu?

LittleBiG
Posts: 56
Joined: Tue Feb 10, 2015 11:56 am
My ELO: I don't know

Re: Build 2015.05

Post by LittleBiG » Fri May 22, 2015 6:15 pm

sergeyvl wrote:Do you use Kobo Start Menu?
No, I don't.
Kobo Mini v3.4.1 and Pocketbook Touch Lux 2 v5.8

sergeyvl
Posts: 1564
Joined: Sun Nov 13, 2011 5:43 pm
My ELO: 1700-1800
Location: Харьков
Contact:

Re: Build 2015.05

Post by sergeyvl » Fri May 22, 2015 6:27 pm

Do you use modified launcjer.sh to exit to nickel?

LittleBiG
Posts: 56
Joined: Tue Feb 10, 2015 11:56 am
My ELO: I don't know

Re: Build 2015.05

Post by LittleBiG » Fri May 22, 2015 6:31 pm

sergeyvl wrote:Do you use modified launcjer.sh to exit to nickel?
I use the noreboot.zip.
Kobo Mini v3.4.1 and Pocketbook Touch Lux 2 v5.8

sergeyvl
Posts: 1564
Joined: Sun Nov 13, 2011 5:43 pm
My ELO: 1700-1800
Location: Харьков
Contact:

Re: Build 2015.05

Post by sergeyvl » Fri May 22, 2015 6:37 pm

LittleBiG wrote:
sergeyvl wrote:Do you use modified launcjer.sh to exit to nickel?
I use the noreboot.zip.
This is the reason. Restore launcher.sh from the latest package. And create "nickel" file in "vlasovsoft" if you don't want to reboot. The approach was changed. See release notes in the first post.

Post Reply